Newtec (ST Engineering) MDM6100 Broadcast Satellite Modem
| Condition: | New OEM |
| Model: | MDM6100 |
| Manufacturer: | Newtec |
Newtec (ST Engineering) MDM6100 Broadcast Satellite Modem
The Newtec MDM6100 Satellite Modem is the next-generation DVB compliant modem specifically designed for broadcast applications. The modem supports the DVB-S2 and DVB-S2X, next to the legacy DVB-S and DVB-DSNG standards in order to achieve barrier-breaking efficiency. The unit can act as a MPEG Transport Stream modulator, demodulator or modem.
As a modulator, it is best suited for broadcast direct-to-home, primary distribution to headends and contribution of television and radio content. As a modem or demodulator, it is typically installed in head-ends or at both sides of a contribution link. The MDM6100 can be used in conjunction with set-top boxes, professional Integrated Receiver Decoders (IRDs) or professional satellite demodulators.
Key Features
- Single Transport Stream modem with optional data stream via MPE encapsulation/decapsulation
- Baud rate range: 256 kbaud – 72 Mbaud
- Data rates up to 216 Mbit/s
- IF (70/140MHz) and L-Band (950-2,150MHz) high power outputs
- Optional integrated RF upconverter (Ku-band or C-band)
- Demodulator with dual L-Band or selectable IF-or L-band (option) input
- Highest system reliability and service uptime through robust design and industry-leading redundancy solutions
- Exceptional jitter recovery on TS over IP input with SMPTE 2022 FEC
- Redundant optional ASI or GbE interfaces with support of redundant IP network configurations
- User configurable alarm table for device redundancy switching
- Input TS redundancy switch based upon null packet stuffing exceeding a set limit
- Built-in TS Analyser with
– TR101 290 priority 1 and 2 error monitoring
– PID table with rate and PCR jitter measurements
– Continuity Count error monitoring per PID
- Receiver Non-Linear Post Compensation (NLPC 2.0) for a better link margin in case of multiple carriers per transponder, reduces intermodulation interference
- Accurate link margin monitoring through the use of NoDE (Noise & Distortion Estimator) tool
- RFI reduction using optional DVB RF Carrier ID (DVB-CID) and NIT table CID (default)
- Input rate recovery based upon PCR timestamps
- Automatic TS rate adaptation
- L-band monitoring output
- Market-leading RF purity and performance
- Programmable amplitude slope equalizer
- PRBS generator for link performance tests
- Output level adjust for cable loss compensation
- Optional high stability internal clock reference
- Optional dual AC power supply
- Low Total Cost of Ownership as a result of very high bandwidth efficiency technology options, and ease of monitoring and control
- DVB-S2X, DVB-S2, DVB-DSNG and DVB-S compliant
- Newtec S2 Extensions
- QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK and 256 APSK
- Clean Channel Technology provides up to 15% bandwidth efficiency gain on top of the DVB-S2 standard
- Optional automated Equalink 3 predistortion provides up to 10% bandwidth
- gains, higher QoS and geographic coverage
- Selection of DSNG profiles acc. WBU-ISOG including the new DVB-S2X standard
- Secure front panel, SNMP, HTTP and CLI interfaces
- Optional PID Activity Monitoring for ECM/EMM message interruption triggering external management system
- Optional built-in support for opportunistic data insertion up to 20 Mbps, interoperable
- with IRDs which support Multi Protocol Encapsulation (MPE)
- MPE decapsulator up to 20 Mbps
- Supports SFN Networks using transparent TS pass-through
- Optional BISS content protection
- Demodulator supports the automated Equalink 3 calibration protocol
- External reference input
- Optional 10 MHz reference output
- Easy integration with industry-leading management systems (EMS/NMS/OSS)
- Feature-based pricing and software upgrades
- Pay-as-you-grow flexible licensing scheme
Applications
- Broadcast Direct-to-Home (DTH)
- Broadcast primary distribution
- Broadcast fixed contribution
- Upgrade of distribution networks towards Newtec
- S2 Extensions or DVB-S2X
- Transmodulation of DVB-S/S2 to DVB-S2, DVB-S2X or Newtec S2 Extensions
Skybrokers has supplied various MDM6100 modems to Satellite Services providers and Teleport Operators. As Newtec BE-partner we have special pricing agreements and we can deliver relatively quicker, ex works Belgium. Please ask us for more information.
Newtec (ST Engineering) MDM6100 Broadcast Satellite Modem
